SC-6200M Digital Conference Microphone Controller

1. Support wired and wireless conference at the same time.
2. With a 4.3-inch LCD full-color touch screen, you can realize the parameter setting or view.
3. Original digital ring network technology audio clock synchronous transmission technology, audio delay is less than 5ms, sampling rate 48K uncompressed audio transmission.
4. Adaptive interference avoidance technology to achieve stronger anti-interference capability and multiple signals are available.
5. Built-in high-performance DSP processor, with audio matrix, EQ, volume, delay and other adjustment functions.
6. It supports for 10-band EQ adjustment function, 16-way multi-function output channel and 2-way LINEOUT output channel have 10-band EQ adjustment function.
7. Four microphone management mode: FIFO (FIFO), NORMAL (ordinary mode), VOICE (voice-activated mode), APPLY (application mode).
8. Support for RS232 central control, microphone switch, priority, volume, shutdown and other controls.
9. There are 1 channel RCA, 1 channel XLR interface, 2-way Phoenix terminal audio input interface.
10. There are 1 channel RCA, 1 channel XLR connector, 16 channel Phoenix terminal audio output interface. Each output channel can be adjusted volume, EQ, delay and other parameter.
11. The conference host using TCP / IP network protocol, and at the same time support C / S, B / S architecture, PC software or browser control.
12. It can control the audio matrix parameters (including EQ, volume, microphone sensitivity, etc.), 16-channel output mode switching, switch microphone synchronisation, control role separation host.
13. The computer software supports switching a wireless unit individually and switching off all wireless units with one key, and can view the battery level, WiFi signal and other information status of the scanned wireless units.
14. The system supports a maximum of 4096 wired conference units and 300 wireless conference units. It supports maximum 8 wired microphone and 6 wireless microphone open and speak at the same time.
15. Supports the ring hand-in-hand function to ensure that the conference can continue normally if one of the network cables is disconnected or one unit has problem.
16. Support simultaneous interpretation function, the system can transmit up to 63+1 wired simultaneous interpretation at the same time.
17. With fire alarm linkage trigger interface, provide fire alarm information, the first time to remind the venue personnel emergency evacuation, to ensure the safety of the participants.
18. With USB recording function, and physical buttons on the panel can turn on the recording with one key, and recording status indicator prompts.
19. Support PELCO-D, VISCA camera control protocols, can control 10 sets of high-definition camera tracking screen settings, to achieve automatic camera tracking.
20. the system has the initiation of the meeting sign-in, voting, election, rating, satisfaction, customization and other functions.
21. The system unit has a hot-swappable function, and the original function can be restored automatically when it is plugged in again.
22. The conferencing system is also capable of limiting the number of speakers when computers are not in use.
23. With independent 3.5 headset monitoring function, can be equipped with conventional power 40mW headphones for direct use.
24. Optional support docking voice transcription server, voice transcription function.
25. Optional dual-machine hot backup function, when a host power failure or when the host fails, it can be automatically switched to the slave operation, to achieve dual backup function.

Hot Tags: SC-6200M Digital Conference Microphone Controller, China SC-6200M Digital Conference Microphone Controller manufacturers, factory