Product Features
1. A new type of digital-analog combined power amplifier in 2U height 88 mm, Light weight, easy to carry and install.
2. 4 channel models are available .
3. Transparent sound, sufficient energy, delicate medium and high frequency , strong
and elastic low frequency.
4. Carefully-selected high quality components. 100% quality inspection from material to finished product, which make high stability and long last working life of the amplifiers.
5. High stability of working performance and long - lasting working life .
6. Full automatic protection against short circuit, over-load, over-heat, mismatch, switch on/off and radio frequency interference.
7. Compact structure,it is a good choice to use them in wedding, KTV, bar, small roadshow, conference, etc.
Specification
|
Model No. |
ST-B600 |
ST-B800 |
ST-B1000 |
|
Channel number |
4 channels |
4 channels |
4 channels |
|
Circuit category |
digital-analog combined |
digital-analog combined |
digital-analog combined |
|
Height |
2U(88mm) |
2U(88mm) |
2U(88mm) |
|
Output power at 4 Ohm |
1050W*4 |
1450W*4 |
1750W*4 |
|
Output power at 8 Ohm |
600W*4 |
800W*4 |
1000W*4 |
|
Bridge output power at 8 Ohm |
1600W*2 |
2000W*2 |
2500W*2 |
|
Voltage Gain |
34dB |
||
|
Input Sensitivity |
0db(0.775V rms) 1.0V/26dB |
||
|
Frequency response |
20Hz to 20k Hz(+/-0.5dB),1W 8 Ohm |
||
|
Slew Rate |
≥10V/us |
||
|
Damping factor |
>400 |
||
|
Cross Talk |
>70dB |
||
|
S/N Ratio |
>112dBA |
||
|
THD+N |
< 0.58%,20-20K Hz,1W |
||
|
IMD |
< 0.1% 1kHz and 1dB below |
||
|
Automatic Protection |
Protections against short circuit protection, overload, overheat, radio-interference, on/off switching, mismatched load. |
||
|
Connection of Analog channel |
Analog channel:3-pin XLR(Including 2*3 audio link output),electronic balance input. |
||
|
Connection of Output |
Speakon Neutrik (4*nlt4) |
||
|
Mode Selection Switch |
The pull switch on the rear panel is used to select stereo mode, bridge mode, or parallel mode. |
||
|
Rated Voltage |
220V AC 50Hz |
||
|
Working Voltage |
200-250V AC |
||
|
Indicator light |
Independent LED indicator light for each channel; Voltage peak limiter(VPL); CPL;High frequency(VHF); High temperature; Failure; Mute |
||
|
Product Dimension(W*H*D) |
483*88*375mm |
||
|
Packing Dimension(W*H*D) |
550*505*140mm |
||
|
Net Weight |
16kg |
18kg |
20.05kg |
Hot Tags: ST-B600 ST-B800 ST-B1000 Professional Digital Power Amplifier, China ST-B600 ST-B800 ST-B1000 Professional Digital Power Amplifier manufacturers, factory
